Beamz BT400 Lightweight


Ikke på lager, men kan restbestilles

Kategorier: ,


Kraftig led par i et kompakt og lett chassis.

12 x 10W LED, 2,2KG.


The BT-4 series is a range of high powered LED pars built into a slimline ABS housing so it can fit in the tightest of spaces like box truss. These fixtures are equipped with a power-connector in/out for daisy chaining multiple units together. All BT4 models have pre-set programs that can be used in stand-alone mode. In the DMX settings there is the choice of different DMX modes with pre-set colour macro’s or a mode where you can control every single colour individually per section. The same can be done in stand-alone mode with the supplied remote control. The robust ABS housing and double stand also make the BT Pars ideal for rental as they are lightweight and easy to setup. Ideal for DJs, bands, stages and venues wanting a great colour wash.

  • 12x 10W 4-in-1 LEDs
  • Circle pixel controlled
  • RGBW Colour mixing with full saturation control
  • Colour Temp. 2700 – 8000K
  • CTB and CTO Colour
  • Lightweight ABS housing
  • 10 or 18 DMX channels
  • Built-in programs
  • DMX and Stand-alone mode
  • Master/slave function
  • 0-100% Dimmer
  • Sound controlled
  • Auto mode
  • DMX in/output via 3-pin XLR
  • Control panel with LED display
  • Power-connector input/output
  • IR remote control
  • Double bracket also acts as floor stand


Brand beamZ
Features Master/Slave mode
Light source 4-in-1 LED
LED colours Red, Green, Blue, White
LED power 10
Colour temperature 2700K – 8000K
Quantity of LEDs 12
Beam angle 22°
Field angle 40°
Illuminance 12855 lx @ 1m
Flash rate per second 0 – 25Hz
DMX channels 10, 18
DMX connector 3-pin XLR
Modes Automatic programs, DMX, Master/Slave
IP rating IP20
Cooling Fan
Display LED
Power plug Power-connector
Power consumption 0.99 – 0.45A
Power supply 100-240VAC 50/60Hz
Dimensions (L x W x H) 220 x 270 x 115mm
Weight 2.2
Accessories DMX cable, Mounting bracket, Power cable, Remote control, Safety cord

Du liker kanskje også…