KGEAR GP12A Active Array System


Prisen gjelder 1 stk. aktiv sub med søyle. Du kan bygge på med passive høyttalere om ønskelig.

Ikke på lager, men kan restbestilles

Kategorier: ,


12″ Subwoofer + 16×2″ Modular Column System (Active)

GP12 is a portable high performance Sub + Column system that features a 12” subwoofer with a ferrite magnet and a modular column with 16×2” drivers with neodymium magnets.

The active version has a 4x750W RMS Class-D amplifier built-in and is capable of driving up to 3 full GP12 passive systems at the same time. The column divers feature an alternating angle pattern that increases the dispersion up to 140° on the horizontal plane to provide a very immersive sound field while assuring a long throw and a narrow vertical dispersion. GP12 comes with 4 factory presets to adapt to any needs.

Thanks to the quick setup and its compact form factor, GP12A/GP12 is an incredibly effective solution for small and medium temporary and fixed applications where performance to size ratio is key, such as events of any kind, small stages, trade shows, broadcast and corporate.

Tech specs


Power Handling: 600W subwoofer + 500W satellite
Impedance: 8 O subwoofer + 16 O each segment
Frequency Range: 37Hz – 20KHz (-6dB average)
Maximum SPL(1): 122dB peak
Coverage: V.20° – H.140°


Subwoofer: 12” ferrite magnet
Mid High Frequency: 2 modules with 8×2” neodymium magnet


Analog balanced I: 2 x Combo jack-XLR female line
Analog power O: 1 x Speakon to drive a GP12 Passive System in a stereo configuration


Volume potentiometer | RJ45 connector | DSP can be remotely controlled via an Ethernet connection through Powersoft ArmoniaPlus Software



Type: 4-channel Class-D audio amplifier
Power: 4x 750W @4ohm
AC input: 100-240V AC @50-60Hz (Powercon connector)
Max power consumption: 500W Rated Load (1/8 Max Power)
Protections: Thermal Protections (Power limiting – Thermal Shutdown), Short-circuit/overload output protections, stationary high frequency protection, peak limiter, RMS limiter, frequency dependent RMS limiter, Clip limiter.



Width: 405mm
Height: 445mm
Depth: 430mm
Weight: 20kg
Material: plywood
Rating: IP41


Width: 85mm
Height: 1610mm
Depth: 105mm
Weight: 4.5kg
Material: ABS
Rating: IP54

GP18-BASE: Floor stand for GP18/GP18A GP12/12A columns (optional)