KGEAR GP1812A Powered Array System


Prisen gjelder 1 stk. aktiv sub med høyttaler. Du kan bygge på med passive høyttalere om ønskelig.

Ikke på lager, men kan restbestilles

Kategorier: ,


Sub med innebygd forsterker, som driver den medfølgende toppen, og også et komplett passivt system hvis du ønsker en stereo løsning.


Heavy duty 18” powered subwoofer combined with GH12, our 12” passive coaxial satellite featuring K-array™ SAT® (Slim Array Technology).

It can drive a GP1812 passive system in a stereo configuration. It features Powersoft™ DSP and power module with ethernet remote control and Armonia™ control software.

Designed for small to medium high performance outdoor/indoor applications both for rental and permanent installations for touring, live bands, auditoriums, pubs and clubs.

High performance to size/weight ratio featuring easy and fast setup possibility.

User Tip: optimize the cost and combine the system with the passive model whether it is for stereo configurations or if you prefer to extend the cluster.

Tech specs


Power Handling: 750W subwoofer + 200W satellite
Peak Power: 1500W subwoofer + 400W satellite
Impedance: 8Ω subwoofer + 32Ω satellite
Frequency Range: 30Hz – 20KHz (-6dB average)
Maximum SPL(1): 129dB (peak)
Continuos SPL: 117 dB
Coverage: V.30° – H.90°


Subwoofer: 18” ferrite magnet
Mid High Frequency: 12” coaxial with 1” compression driver ferrite magnet


Analog balanced I: 2 x Combo jack-XLR female line
Analog power O: 1 x Speakon to drive a GP1812 Passive System in a stereo configuration


Volume potentiometer | RJ45 connector | DSP can be remotely controlled via an Ethernet connection through Powersoft ArmoniaPlus Software


Type: 4-channel Class-D audio amplifier
Power: 4 x 1500W @4ohm
AC input: 100-240V AC @50-60Hz
Max power consumption: 500W Rated Load (1/8 Max Power)
Protections: Thermal Protections (Power limiting – Thermal Shutdown), Short-circuit/overload output protections, stationary high frequency protection, peak limiter, RMS limiter, frequency dependent RMS limiter, Clip limiter




Width: 545mm (21,46in)
Height: 610mm (24,02in)
Depth: 600mm (23,6in)
Weight: 35,4kg (76,37lbs)
Material: birch plywood
Rating: IP41


Width: 327mm (12,87in)
Height: 334mm (13,15in)
Depth: 198mm (7,79in)
Weight: 13,8kg (30,43lbs)
Material: stainless steel
Rating: IP54

G-POLE: Adjustable satellite stand with M20 screw bottom (included)
K-SPKCABLE2: 2m Speakon cable (included)

Du liker kanskje også…